You Better - DesignsByStina Inspired

Sample:
Discloser: This tutorial assumes you have good working knowledge of Paint Shop Pro and its tools. It was created and written in PspX2 but may be done in previous versions. My tutorials are from my own creative imagination any resemblance to other tutorials is strictly coincidental. If I am using a brush or mask that belongs you and I don't have you listed please let me know which tutorial and which item is yours include your designer name and website information so I can give you credit and remove them from the materials. I am copyright compliant so any tutorial that has a tube whether it is a Pay To Use (PTU) or Free To Use (FTU) will never be included in my materials. The same goes for scrap kits.

Do Not re-write , copy or claim any of my tutorials as your own as the are all copyrighted.   (JZ8Q-RWIP-N1BZ-VKR7) Under the US CODE 17 §5.03


Materials Not Included:

ScrapKit: Creators Of The NightDesigns By Stina

A Tube:Creations By Karma 4 You

PlugIns Used :r>

FM Tile Tools: Blend Emboss

Mura's Meister: Copy

Settings Used Throughout:

Signpost Drop shadow: 2,2,80,2,#000000

Skull Drop Shadow: 4,4,100,10, #000000

Tube Drop Shadow: 2,2,100,5,#000000

Tutorial Instructions:

Step 1: Create new canvas: 700 * 200

CTRL+A

Layers: New Raster Layers:

Step 2: open paper12: CTRL+C and close

Step 3: On canvas: CTRL+SHIFT+L ; Layers: New Raster Layers

Step 4: Open paper5: CTRL+C and close

Step 5: On Canvas: CTRL+SHIFT+L

CTRL+D

Effects: Plugins:  FM Tile Tools: Blend Emboss: Default : apply 2 times

Layers: Load / Save Mask: cbk4y_woods: (you might have to invert)

Merge Group: Merge Visible

Step 6: open gravestone: CTRL+C and close

Step 7: On canvas: CTRL+L

SHIFT+S: 45 px (width) all layers unchecked

Move to the right on the hill (see mine for placement)

Apply Blend Emboss

CTRL+L ; duplicate

SHIFT+S: 75 px (width)

Move back by the trees

Effects: Plugins: Mura's Meister:  Copy:  Number: 4 ; Shift X: 32

Apply Blend Emboss

Activate the tombstone: SHIFT+S: 100 px (width)

Move just in front and in between back row of tombstones

Effects: Plugins: Mura's Meister: Copy: Number: 3 ; Shift X: 25

Apply Blend Emboss

Step 8: open hand: CTRL+C and close

Step 9: On canvas: CTRL+L

SHIFT+S: 150 px (width)

Move to the right lower corner (see mine for placement)

Adjust: Sharpness:  Sharpen More

Duplicate: Adjust: Gaussian Blur: 5: Change blend mode to multiply

Step 10: Open lantern : CTRL+C and close

Step 11: on Canvas: CTRL+L

SHIFT+S: 170 px (width)

Move to the right side on top of hand, move this layer below both hand layers

Step 12: Open signpost: CTRL+C and close

Step 13: On canvas: CTRL+L

SHIFT+S: 150 px (width)

Move to the left side (see mine for placement)

Adjust:  Sharpness: Sharpen

Effects: 3D: Drop shadow: Signpost settings above

Step 14: Open skull and bone:  CTRL+C and close

Step 15: On canvas: CTRL+L, CTRL+M

SHIFT+S: 100 px (width)

Move to the bottom of the signpost (see mine for placement)

Apply Blend Emboss

Effects: 3D: Drop Shadow: Skull settings above

Step 16: Open Vulture: CTRL+C and close

Step 17: CTRL+L, CTRL+M

SHIFT+S: 100 px (width)

Move to left of the skull (see mine for placement)

Move this layer under the skull and bone layer

Adjust: Sharpness: Sharpen

Step 18: Open fire: CTRL+C and close

Step 19: On Canvas: CTRL+L

SHIFT+S: 100 px (width)

Move to the base of the tree from mask (see mine for placement)

Step 20: open your tube: CTRL+C and minimize

Step 21: On canvas CTRL+L

SHIFT+S: 75 px (width)

Move in front of the grave we created

Adjust: Sharpness: Sharpen

Effects: 3D: Drop shadow: Tube settings above

Hide the merged layer

Merge visible

Unhide the merged layer

CTRL+C the merged layer (the background)

Merge all.

Step 22: CTRL+SHIFT+V, minimize

Step 23: On canvas:  Adjust:  

Add border: 1 : #FFFFFF

Add border: 5: any color but white

Using your mask wind: click on the new border

CTRL+SHIFT+L

Add border: 2 : #FFFFFF

Step 24: SHIFT+S: 600 px (width) all layers checked

Add copyright

Add name

Text

Save as .jpg

If you would like to do the avatar follow these short instructions:

Step 1: New canvas: 150 * 150

CTRL+A

CTRL+SHIFT+L

Layers: New Raster Layer

Step 2: Maximize tube: CTRL+C (if you have a close up of same tube use that)

Step 3: CTRL+SHIFT+L

Change opacity to 50

CTRL+D

Image:  Add Border: 2 , #ffffff

Using magic wand click on the border

Adjust: Add / Remove Noise:  Add Noise:  Uniform, 100, monochrome checked, CTRL+D

Image: Add Border: 2, #000000

Step 4:  SHIFT+S: 150 px (width) all layers checked

Add your copyright

your text

Save as .jpg

Thank you for trying my tutorial “Sexy Beast”. I hope you enjoyed it. Any questions or concerns please contact Karma Happy Creating!

Read More

Hope - DesignsByStina Inspired

Sample: Discloser: This tutorial assumes you have good working knowledge of Paint Shop Pro and its tools. It was created and written in PspX2 but may be done in previous versions. My tutorials are from my own creative imagination any resemblance to other tutorials is strictly coincidental. If I am using a brush or mask that belongs you and I don't have you listed please let me know which tutorial and which item is yours include your designer name and website information so I can give you credit and remove them from the materials. I am copyright compliant so any tutorial that has a tube whether it is a Pay To Use (PTU) or Free To Use (FTU) will never be included in my materials. The same goes for scrap kits.

Do Not re-write , copy or claim any of my tutorials as your own as the are all copyrighted.   (JZ8Q-RWIP-N1BZ-VKR7) Under the US CODE 17 §5.03


Materials Not Included:

ScrapKit: Beyond Blue:Designs By Stina

Mask: cbk4y_abstractCreations By Karma 4 You

Tube: [url=www.calandrastudio.com]Michael Calandra[/url]

PlugIns Used :

FM Tile Tools : Blend Emboss

AAA Frames: Texture Frame

Settings Used Throughout:

Mask Drop Shadow: 2,2,100,5, #001527

Ribbon Drop Shadow: 5,10,76,4, #000000

Frame Drop Shadow: 5, (-3),50, 10,  #001527

Tag Drop Shadow: 10, (-5), 70, 32, #001527

Black Cat Drop Shadow:  5,5,100,4,#92c0d0

Tutorial Instructions:

Step 1: Create new canvas : 800 * 800

Flood fill white or a color of your choosing

CTRL+A

Layers: New Raster Layer

Step 2: Open paper14: CTRL+C and close

Step 3:  CTRL+SHIFT+L

Effects: Plugins: FM Tile Tools: Blend Emboss: Default Settings

CTRL+D

Layers:  Load / Save Mask: cbk4y_abstract ; check the following: source luminance, fit to canvas, hide all mask

Merge Group

Reapply the blend emboss

Effects: 3D: Drop shadow: Mask settings above

Step 4: Open ribbon01: CTRL+C and Close

Step 5: CTRL+L

SHIFT+S: 300 px (width) all layers unchecked

Effects: 3D: Drop shadow: ribbon settings above

Step 6: Open frame05: CTRL+C and close

Step 7: CTRL+L

SHIFT+S: 213 px (width) all layers unchecked

Effects: Plugins: FM Tile Tools: Blend Emboss: Default

Using your magic wand click on the inside of the frame

Selections: Modify: Expand: 4

Layers: New Raster Layer

Step 8: Open paper12: CTRL+C and close

Step 9: CTRL+SHIFT+L, CTRL+D, move this layer under frame layer

Step 10: Open your tube: CTRL+C and close

Step 11: CTRL+L move this layer above frame layer  and to the left (see mine for placement)

Highlight frame layer:

Effects: 3D: Drop shadow: Frame settings above

Step 12: Open flowers: CTRL+C and close

Step 13: CTRL+L

SHIFT+S: 100 px (width) all layers unchecked

Move to the right bottom corner of the frame

Duplicate ; CTRL+M (see mine for placement)

Merge Down

Apply Blend Emboss plugin

Step 14: Open tag02: CTRL+C and close

Step 15: CTRL+L

SHIFT+S: 80 px (width) all layers unchecked

Effects:3D: Drop shadow: Use tag settings

Step 16: Open key: CTRL+C and close

Step 17: CTRL+L

SHIFT+S: 200 px (width) all layers uncheched

Move to left side of tag (see mine for placement)

Apply the blend emboss plugin

Step 18: Open black cat: CTRL+C and close

Step 19: CTRL+L

SHIFT+S: 100 px (width) all layers unchecked

Move to the left (see mine for placement

Effects: 3D: Drop shadow: Black cat settings

Merge all visible

Effects: Plugins: AAA Frames: Texture Frame:  width: 32; check stroke: 19, brightness: 3, soften: 5, opacity: 100

Step 20: SHIFT+S: 500 px (width) all layers checked

Add Copyright Information

Add name

Text

Save as a .jpg

Thank you for trying my tutorial “Sexy Beast”. I hope you enjoyed it. Any questions or concerns please contact Karma Happy Creating!

Read More

No Excuses - DesignsByStina Inspired

Sample: Discloser: This tutorial assumes you have good working knowledge of Paint Shop Pro and its tools. It was created and written in PspX2 but may be done in previous versions. My tutorials are from my own creative imagination any resemblance to other tutorials is strictly coincidental. If I am using a brush or mask that belongs you and I don't have you listed please let me know which tutorial and which item is yours include your designer name and website information so I can give you credit and remove them from the materials. I am copyright compliant so any tutorial that has a tube whether it is a Pay To Use (PTU) or Free To Use (FTU) will never be included in my materials. The same goes for scrap kits.

Do Not re-write , copy or claim any of my tutorials as your own as the are all copyrighted.   (JZ8Q-RWIP-N1BZ-VKR7) Under the US CODE 17 §5.03

Materials Not Included:

Scrapkit: White Ribbon Day: By Designs By Stina

Tube(s):  Zindy S.D. Nielson

Mask: RD_MaskSet150_Mask2 and  RD_MaskSet118_Mask 1:By: Rachel Designs

PlugIns Used :
Xero: Porcelain:  default
Settings Used Throughout:

Mask Settings: 1,1,100,1, #808080

Tube Settings: 1,1,100,6, #202020

Ribbon Settings: 1,1,50, 1, #000000

Music Notes Settings: 2,2,50,2, #808080

WordArt Settings: 0,0,100,5, #000000

Flowers settings: 0,0,75,10, #000000

Leaves settings:  (-1),(-1), 55, 3.17, #202020

Tutorial Instructions:

Step 1: Create a new canvas: 800 * 800; Flood fill with white - rename layer - background

Step  2: Open  Paper07; CTRL+C and close

Step 3: On canvas: CTRL+L - rename layer - mask

Layers: Load Mask From Disk: RD_Mask150_Mask 2: check source luminance, fit to canvas, hide all mask; click load; merge group

Effects: 3D: Drop Shadow: use mask settings above

Step 4: Open  wire; CTRL+C and close

Step 5: On canvas: CTRL+L - rename layer - mask2

Layers: Load Mask From Disk: RD_Mask118_Mask 1: check source luminance, fit to canvas, hide all mask; click load; merge group

Effects: 3D: Drop Shadow: use mask settings above

Step 6: Open Frame01: CTRL+C and close

Step 7: On canvas: CTRL+L

SHIFT+S: 250 px ( width) all layers unchecked; rename layer - frame

Using your magic wand tool click on the inside of the left frame; Selections: Modify: Expand: 4

Layers New Layer: Name Left Matte

Step 8: Open paper04: CTRL+C and close

Step 9: On canvas: CTRL+SHIFT+L ; Layers: New Layer: Name  Picture

Step 10: Open tube: CTRL+C and close

Step 11: On canvas : CTRL+SHIFT+L

Duplicate: Adjust:  Gaussian Blur: 5.00 rename layer: tube effects

Effects: Plugins:  Xero: Porcelain: default settings

On original tube layer

Effects: 3D:Drop Shadow:  use tube settings above

Using your magic wand tool click on the inside of the left frame; Selections: Modify: Expand: 4

Layers New Layer: Name Right Matte

Step 12:  Open paper04: CTRL+C and close

Step 13: On canvas: CTRL+SHIFT+L ; Layers: New Layer: Name  Picture

Step 14: Open tube: CTRL+C and close

Step 15: On canvas : CTRL+SHIFT+L

Duplicate: Adjust:  Gaussian Blur: 5.00 rename layer: tube effects

Effects: Plugins:  Xero: Porcelain: default settings

Effects: 3D:Drop Shadow:  use tube settings above

Step 16: Open Ribbon4: CTRL+C and close

Step 17: On Canvas: CTRL+L, SHIFT+S, 100 px (width) all layers unchecked.

Move to the right side of your frame (see mine for placement)

Effects: 3D: Drop Shadow: use ribbon settings above

Duplicate, CTRL+M

Activate the mask2 layer

Step 18: Open musicnotes: CTRL+C

Step 19: On canvas: CTRL+L

SHIFT+S, 400 px (width) all layers unchecked, move slightly up. (see mine for placement)

Effects: 3D: Drop Shadow: Use music notes settings above

Highlight the left ribbon layer

Step 20: open words02: CTRL+C and close

Step 21: On canvas: CTRL+L

SHIFT+S: 224 px (width) all layers unchecked, move to the top of the frame. (see mine for placement)

Effects: Drop Shadow: Use word art settings above

Step 22: Open flowers CTRL+C and close

Step 23: CTRL+L, SHIFT+S:  250 px (width) all layers unchecked

CTRL+M, move this layer under the frame layer

Duplicate: Adjust: Blur: Gaussian Blur: 5.00

On original flower layer: Effects: 3D: Drop Shadow: Use flowers settings above

Step 24: Open leaves03: CTRL+C and close

Step 25: CTRL+L, SHIFT+S:  150 px (width) all layers unchecked

CTRL+M, CTRL+I, Duplicate, CTRL+M, CTRL+I

Merge down

Move this layer under the frame layer

Effects: 3D: Drop Shadow: use the leaves settings above

Step 26: Merge all

SHIFT+S: 500 px (width) all layers checked

Add copyright

name (Font I used for the name is: Cash Currency with a drop shadow :  1,1,100,1, #ffffff)

Save as jpg.

Thank you for trying my tutorial “Sexy Beast”. I hope you enjoyed it. Any questions or concerns please contact Karma Happy Creating!

Read More

Let Them - DesignsByStina Inspired

Sample: Discloser: This tutorial assumes you have good working knowledge of Paint Shop Pro and its tools. It was created and written in PspX2 but may be done in previous versions. My tutorials are from my own creative imagination any resemblance to other tutorials is strictly coincidental. If I am using a brush or mask that belongs you and I don't have you listed please let me know which tutorial and which item is yours include your designer name and website information so I can give you credit and remove them from the materials. I am copyright compliant so any tutorial that has a tube whether it is a Pay To Use (PTU) or Free To Use (FTU) will never be included in my materials. The same goes for scrap kits. Do Not re-write , copy or claim any of my tutorials as your own as the are all copyrighted.   (JZ8Q-RWIP-N1BZ-VKR7) Under the US CODE 17 §5.03 Materials Not Included:

Scrapkit: Beyond Blue Designs By Stina

Template: Letthem_cby4y Creations By Karma 4 You

Tube: Tribute To Robin Williams (FTU-was free when I got it) Arthur Crowe

Settings Used Throughout:

Rectangle Layer: 1,1,100,6, #254d6b and (-1),(-1),100,6, #254d6b

Long rectangle layer: 0,0, 100, 20, #000000

Word art layer: 1,1,100,1, #f65c5c

Frame layer: 1,1,50,1, #000000

Heart Layer: 1,1,32,4,#000000

Element Layers: 2,2,100,4,#000000

Tutorial Instructions:

Step 1: Open letthem_cbk4y template: SHIFT+D close original

Delete copyright info

Highlight rectangle layer

CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers: New Raster Layer

Step 2:  Open paper02: CTRL+C and close

Step 3: On canvas: CTRL+SHIFT+L

CTRL+D and delete original rectangle layer

Add both of the drop shadows under the settings used for rectangle

Highlight the waves layer change the mode to hard light

Highlight long rectangle layer

CTRL+A, CTRL+F, CTRL+SHIKFT+F

Layers : New Raster Layer

Step 4: Open paper 1: CTRL+C and close

Step 5: On canvas: CTRL+SHIFT+L

CTRL+D and delete original long rectangle layer

Add drop shadow under  the settings used long rectangle layer

Highlight wordart layer

Add drop shadow under the settings used for word art layer

Highlight the matte layer:

CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers: New Raster Layer

Step 6: open paper10: CTRL+C and close

Step 7: On canvas: CTRL+SHIFT+L; layers ; New Raster Layer:

Step 8: open your tube: CTRL+C and close?

Step 9: CTRL+SHIFT+L

CTRL+D and delete original matte layer

Highlight frame layer

Add drop shadow under the settings used for frame layer

Highlight anyone of the heart layers

Add drop shadow under the settings used heart layer

We are going to add the elements now: I always start with my top layer highlighted then move the element layer down after all settings are added.

Step 10: open cluster06-b: CTRL+C and close

Step 11: On canvas: CTRL+L

SHIFT+S: 132 px (width) all layers unchecked

Add drop shadow under the settings used for element layers

Move this layer under the raster 2 layer above the wave layer

Move to the left hand side (see mine for placement)

Step 12: open roses2: CTRL+C and close

Step 13: On canvas: CTRL+L

SHIFT+S:  75 px (width)

Add drop shadow under the settings for element layer

Move to the left hand corner of frame

Move layer just above the frame

Step 14: Open awarenessribbon1: CTRL+C and close

Step 15: On canvas: CTRL+L

SHIFT+S: 75 px (width)

Add drop shadow under the settings for element layer

Move to the upper left of the frame

Move above the roses2 layer

Step 16: open butterfly: CTRL+C and close

Step 17: On canvas CTRL+L

SHIFT+S:  50 px (width)

Add drop shadow under the settings for element layer

Move to Mr. Williams shoulder. (see mine for Placement)

Move this layer above the awarenessribbon1 layer>/li>
Step 18:open roses1: CTRL+C and close

Step 19: On canvas: CTRL+L

SHIFT+S: 65 px (width)

Add drop shadow under the settings for element layers

Move this to the center of the tag (see mine for placement -  I placed mine between the words on blade.)

Move this layer below the long rectangle layer

Step 20: open sun: CTRL+C and close

Step 21: On canvas: CTRL+L

SHIFT+S:  45 px (width)

Move to the upper right hand corner of the matte (see mine for placement)

Move this layer under the tube layer

Step 22: Open metalplate2: CTRL+C and close

Step 23: On canvas: CTRL+L

SHIFT+S: 100 px (width)

CTRL+R: Right : 90

Move to the right side of the cluster (see mine for placement)

Add drop shadow under the settings for element layers

Move this layer under the long rectangle layer

Step 24: Merge all together

SHIFT+S: 500 px (width) all layers checked

Add copyright info

Add name: I added it on the name tag and the tag itself ( I used the elements layer drop shadow changing the color to #254d6b)

Save as .jpg

Thank you for trying my tutorial “Sexy Beast”. I hope you enjoyed it. Any questions or concerns please contact Karma Happy Creating!

Read More

Love Is - DesignsByStina Inspired

Sample: Discloser This tutorial assumes you have good working knowledge of Paint Shop Pro and its tools. It was created and written in PspX2 but may be done in previous versions. My tutorials are from my own creative imagination any resemblance to other tutorials is strictly coincidental. If I am using a brush or mask that belongs you and I don't have you listed please let me know which tutorial and which item is yours include your designer name and website information so I can give you credit and remove them from the materials. I am copyright compliant so any tutorial that has a tube whether it is a Pay To Use (PTU) or Free To Use (FTU) will never be included in my materials. The same goes for scrap kits. Do Not re-write , copy or claim any of my tutorials as your own as the are all copyrighted.   (JZ8Q-RWIP-N1BZ-VKR7) Under the US CODE 17 §5.03

Materials Not Included:

Scrapkit: Dogtober By: Designs By Stina

Template: 761mpm By: MilliesPspMadness

3 different tubes: Maryline Cazenvae

PlugIns Used :
Eye Candy 4: Gradient Glow Settings Used Throughout:

Paper Drop Shadow:  1,1,60,4.00,#000000

Element Drop Shadow: 2,2,100,4.00,#000000

Tube Drop Shadow:  (-1), 1, 100, 4.00, #000000

Wordart Gradient Glow: 6,25,100,#ffffff

Tutorial Instructions:

Step 1: Open 761mpm, SHIFT+D, close original

Delete the template by millie layer

Highlight layer1: CTRL+A, CTRL+F, CTRL+SHIFT+F

Step 2: Open paper1, CTRL+C and close

Step 3: Activate template

CTRL+L, CTRL+SHIFT+I

Hit the delete key

CTRL+D

Add the paper drop shadow above

Delete original layer

Step 4: Highlight layer 2: CTRL+A, CTRL+F, CTRL+SHIFT+F

Step 5: Open paper 6: CTRL+C and close

Step 6: Activate template

CTRL+L, CTRL+SHIFT+L

Hit the delete key

CTRL+D

Add the paper drop shadow

Delete original layer

Step 7: Repeat step 4 for  layer 3; Repeat step 6

Step 8: Highlight layer 4: CTRL+A, CTRL+F, CTRL+SHIFT+F

Step 9: Open paper3: CTRL+C and close

Step 10: Activate template

CTRL+L, CTRL+SHIFT+I

Hit the delete key

CTRL+SHIFT+I

Step 11: Open 1 of the tubes: CTRL+C and close

Step 12: Activate template:

Layers: New Raster Layer

CTRL+SHIFT+L

CTRL+D

Add tube drop shadow above

Highlight raster 3 layer: Add paper drop shadow

Delete original layer 4

Step 13: Highlight layer 5: Add Element Drop shadow above

Step 14: Open 1 of your tubes: Activate the tube layer you want (if there is more than one layer of the tube) CTRL+M, CTRL+C and close original

Step 15: Activate template

Highlight layer 6: CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers: New Raster Layer: CTRL+SHIFT+L

CTRL+D

Add Tube Drop Shadow above

Repeat step 14 and 15 for layer 7

Highlight layer 8: CTRL+A, CTRL+F, CTRL+SHIFT+F

Step 16: Open paper 11: CTRL+C and close

Step 17: Activate template: CTRL+SHIFT+L

TRL+L, CTRL+SHIFT+I

Hit the delete key

CTRL+D

Add paper drop shadow above

Delete original layer

Repeat with layer 9

Layers 10 and 11: Add the element drop shadow

Step 18-a: You can either leave the word art or delete it . I deleted it and used the additional wordart for Dogtober.  (sold separately from the Dogtober Kit) If you have the word art follow the steps below:

Step 18-b :Open wordart05: SHIFT+S: 150 px (width) all layers unchecked

CTRL+C and close (do not save changes to original)

Activate template: CTRL+L move to the center bottom (see mine for placement

Add wordart gradient glow

Step 19: Open leash2: CTRL+C and close

Step 20: Activate template:

CTRL+L

Add element drop shadow

Move layer under wordart layer

Step 21: Open ribbonflower3: CTRL+C and close

Step 22: Activate Template

CTRL+L

SHIFT+S: 500 px (width) all layers unchecked

Move to the left (see mine for placement)

Add element drop shadow

Duplicate, CTRL+M

Step 23: Open BiscuitBone02: CTRL+C and close

Step 24: Activate template; CTRL+L

CTRL+L

Move to upper left corner ( see mine for placement)

Add element drop shadow

Duplicate, CTRL+M

Step 25: Open dogtag3: CTRL+C and close

Step 26: Activate template

CTRL+L

SHIFT+S: 317 px (width) all layers unchecked

Add element drop shadow

Unhide the background layer: either leave it white or choice a color of your choosing.

Step 27: SHIFT+S:  500 px ( width ) all layers checked

Add copyright Information

Watermark

Name

Save as .jpg

Thank you for trying my tutorial “Sexy Beast”. I hope you enjoyed it. Any questions or concerns please contact Karma Happy Creating!

Read More

Sexy Beast - DesignsByStina Inspired

Sample:

Discloser: This tutorial assumes you have good working knowledge of Paint Shop Pro and its tools. It was created and written in PspX2 but may be done in previous versions. My tutorials are from my own creative imagination any resemblance to other tutorials is strictly coincidental. If I am using a brush or mask that belongs you and I don't have you listed please let me know which tutorial and which item is yours include your designer name and website information so I can give you credit and remove them from the materials. I am copyright compliant so any tutorial that has a tube whether it is a Pay To Use (PTU) or Free To Use (FTU) will never be included in my materials. The same goes for scrap kits.
  Do Not re-write , copy or claim any of my tutorials as your own as the are all copyrighted.   (JZ8Q-RWIP-N1BZ-VKR7) Under the US CODE 17 §5.03

  Materials Not Included:

Scrap kit: Dogtober: By: Designs By Stina

Template: CollabTempMzDixiApril: Created for Creative Misfits

  Settings Used Throughout

Drop Shadow: 2, 2, 100, 4, #000000

  Tutorial Instructions:

  Step 1: Open the CollabTempMzDixiApril.psd , Shift+D and close original

Delete the crinfo layer

Highlight the mask1 layer

CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers:  New Raster layer

Step 2: Open paper02. CTRL+C and close

Step 3: Ensure your new layer is active

CTRL+SHIFT+L

CTRL+D

Change blend mode to multiply

Do Not Delete the original layer

Step 4: Highlight the mask2layer

CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers: New Raster layer

CTRL+SHIFT+L

CTRL+D

Change blend mode to multiply

Do Not Delete the original layer

Step 5: Repeat step 4 for mask3 and mask4 layers

Step 6: Highlight the bigpinksquare layer

CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers: New Raster Layer

Step 7: Open paper 10, CTRL+C and close

Step 8: Ensure your new layer is active

CTRL+SHIFT+L

CTRL+D

Effects: 3D Effects: Dropshadow using the settings above

Delete original layer

Step 9: Open leaves 3, CTRL+C and close

Step 10: CTRL+L and move to the left. (see mine for placement)

Effects: 3D Effects: Dropshadow using the settings above

Step 11: Highlight the outterbk layer

CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers: New Raster Layer

Step 12: Open paper 12, CTRL+C and close

Step 13: Ensure your new layer is active

CTRL+SHIT+L

CTRL+D

Effects: 3D Effects: Dropshadow using the settings above change to (-2) (-2)

Delete original layer

Step 14: Highlight the innersquare layer

CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers: New Raster Layer

Step 15: Open paper0 3, CTRL+C and close

Step 16: Ensure your new layer is active

CTRL+SHIFT+L

CTRL+D

Delete original layer

Step 17: Highlight upperdkpinkrectangle layer

CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers: New Raster Layer

Step 18: Open paper 07, CTRL+C and close

Step 19: Ensure your new layer is active

CTRL+SHIFT+L

CTRL+D

Delete original layer

Step 20: Highlight the pinklines layer

CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers: New Raster Layer

Flood Fill with #FFFFFF (white)

CTRL+D

Delete original layer

Step 21: Repeat step 19 for the lowerpindkkretangle and the pinklines2 layers

Step 22:Highlight the lowerpinkretangle layer

CTRL+A, CTRL+F, CTRL+SHIFT+F

Step 23: Open paper05, CTRL+C and close

Step 24: Ensure you are on the lowerpinkrectangle layer

CTRL+L

CTRL+SHIFT+I

Hit the Delete Key

CTRL+D

Effects: 3D Effects: Dropshadow using settings above change to 2, (-2)

Delete original layer

Step 25: Repeat for the upperpinkrectangle

Effect: 3D Effects: Dropshadow using settings above change to (-2),2

Step 26: Highlight the pinkinnercircle layer

CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers: New Raster Layer

Step 27: Open paper04, CTRL+C and close

Step 28: Ensure your on new layer

CTRL+SHIFT+L

CTRL+D

Delete Original

Step 29: Highlight the pinkdots layer

CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers: New Raster Layer

Flood fill with #000000 (black)

CTRL+D

Delete original layer

Step 30: Highlight the pinkcircleframe

CTRL+A, CTRL+F, CTRL+SHIFT+F

Layers: New Raster Layer

Step 30: Open up paper11, CTRL+C and close

Step 31: Ensure your on new layer

CTRL+SHIFT+L

CTRL+D

Effects: 3D Effects: Dropshadow using settings above (original)

Delete original layer

Step 32: Highlight wordart layer

CTRL+A, CTRL+F, CTRL+SHIFT+F

Step 33: Open paper01, CTRL+C and close

Step 34: Ensure you’re on the wordart layer

CTRL+L

CTRL+SHIFT+I

Hit the delete button

CTRL+D

Delete original layer

Highlight the wordart outline

Step 35: Open  doghouse, CTRL+C and Close

Step 36: Ensure on the canvas

CTRL+L

SHIFT+S: 250 px (width) all layers unchecked

Move slightly to the left and up (see mine for placement

Effects:3D: Dropshadow: Use settings above (original)

Move this layer below the wordart online layer

Step 37: Open dog01, CTRL+C and Close

Step 38: Ensure on the canvas

CTRL+L

SHIFT+S: 250 px (width) all layers unchecked

Move to the opening of the dog house (see mine for placement)

Adjust: Sharpness: Sharpen

Effects: 3D: Effects: Dropshadow:apply

Step 39: Open dogo2, CTRL+C and close

Step 40: Ensure on the canvas

CTRL+L

Move to the right above the word beast (see mine for placement)

Effects: 3D Effects: Dropshadow: apply

Step 41: Open ball, CTRL+C and close

Step 42: Ensure on the canvas

CTRL+L

SHIFT+S: 270 px (width) all layers unchecked

Move slightly to the left and down (see mine for placement)

Adjust: Sharpness: Sharpen

Effects: 3D Effects: Dropshadow apply

Step 43: Open dogtag04, CTRL+C and close

Step 44: Ensure on the canvas

CTRL+L

Move to the left side and over the first white line. (see mine for placement)

Effects: 3D Effects: Dropshadow: change to (-2)(-2)

Step 45: Open dogtag02, CTRL+C and close

Step 46: Ensure on the canvas

CTRL+L

SHIFT+S: 300 px (width) all layers unchecked

Move to the left over the top of the previous dogtag (see mine for placement)

Adjust: Sharpness: Sharpen

Effects: 3D Effects: Dropshadow:  use the settings above (original)

Step 47: Open heartribbon2, CTRL+C and close

Step 48; Ensure on the canvas

CTRL+L

SHIFT+S: 420 px (width) all layers unchecked

<

Move to the upper and to the center (see mine for placement)

Adjust: Sharpness: Sharpen

Effects: 3D Effects: Dropshadow apply

Move this layer under the dog house layer

Step 49: Merge all flatten

SHIFT+S: 500 px (width) check all layers

Add copyright and text

File: Save As: .jpg

 

Thank you for trying my tutorial “Sexy Beast”. I hope you enjoyed it. Any questions or concerns please contact Karma Happy Creating!

Read More